PC-TU200 has a rugged design. In the top of the flip handle makes for easy transport. There is a 140 mm intake fan input high air flow volume with lower RPM to push the cold air through the HDD cage. Sata hot swap HDD cage, using thumb screws with rubber suspension, supports four 3.5" HDDs. To release the side panel, simple just undo the thrum screw, and push the arm. Standard ATX PS/2 power supply unit with cooling fan, it can be facing the motherboard which is passive cooled. Users can easily access USB 3.0, e-SATA and HD audio ports. TU200 has equipped a graphics card holder to hold the graphics card in position, avoid from bending and damage.
General
|
| Form Factor |
Mini tower |
| Max Mainboard Size |
Mini-DTX |
| Supported Motherboards |
Mini-ITX, Mini-DTX |
| Internal Bays Qty |
6 |
| Front Accessible Bays Qty |
1 |
| Colour |
Silver |
| Cooling System |
Front : 140 mm fan x 1 |
|
Expansion / Connectivity
|
| Expansion Bays |
1 (total) / 1 (free) x front accessible - 5.25"
4 (total) / 4 (free) x internal - 3.5"
1 (total) / 1 (free) x internal - 2.5" / 3.5" shared
1 (total) / 1 (free) x internal - 2.5" |
| Expansion Slot(s) |
2 x Expansion Slot |
| Interfaces |
2 x USB 3.0
1 x microphone - mini-jack
1 x headphones - mini-jack
1 x eSATA |
|
Power
|
| Power Device |
No power supply |
|
Dimensions & Weight
|
| Width |
21 cm |
| Depth |
36 cm |
| Height |
32 cm |
| Weight |
3.2 kg |
|
| |
|
|
