NetComm CallDirect Series NTC-6908 Industrial HSPA Cellular Router - Router - cellular modem - desktop

The NTC-6908 provides full routing capabilities for the support of point-to-point or point-to-multi-point communication links. It accommodates multiple communication interfaces and protocols to meet the requirements of diverse telemetry and WAN applications. Fitted with a tri-band 3G module, the NTC-6908 supports data transfers over most of the world's 3G/HSPA cellular networks.
The powerful NTC-6908 hardware platform features a high-speed ARM9-based microcontroller with a generous amount of DRAM and read-writable flash memory. It guaranties flexibility for the development of custom applications onto the device.
The NTC-6908 was designed with remote installation and ease-of-setup in mind. By supporting multi-level system monitoring, it gives you the peace of mind that the device will keep the communication lines up and open.

General
Device Type Router Enclosure Type Desktop Connectivity Technology Wired Data Link Protocol Ethernet, Fast Ethernet Network / Transport Protocol PPPoE, DHCP Routing Protocol RIP, static IP routing Remote Management Protocol SNMP, HTTP Authentication Method PAP, CHAP Features DHCP support, NAT support, dynamic DNS server, MAC address filtering, IP address filtering, firmware upgradable RAM 32 MB Flash Memory 256 MB
Communications
Type Wireless cellular modem Cellular Protocol GSM, GPRS, UMTS, EDGE, HSDPA, HSUPA Max Transfer Rate 7.2 Mbps
Expansion / Connectivity
Interfaces LAN : 1 x 10Base-T/100Base-TX - RJ-45 Serial : 1 x RS-232 - 9 pin D-Sub (DB-9) Expansion Slot(s) 1 SIM card
Aerial
Aerial External detachable Antenna Qty 2
Power
Power Device Power adapter - external Voltage Required AC 120/230 V
Miscellaneous
Width 10.3 cm Depth 2.9 cm Height 12.7 cm Weight 240 g Compliant Standards RoHS, A-Tick
Environmental Parameters
Min Operating Temperature -30 °C Max Operating Temperature 70 °C

Finance Available
Click here for more details