Cisco Systems is redefining best-in-class enterprise and small- to midsize-business routing with a new line of integrated services routers that are optimized for the secure delivery of data services. Founded on 20 years of leadership and innovation, the Cisco 1800 Series integrated services routers intelligently embed data, security, and wireless technology into a single, resilient system for fast, secure, scalable delivery of mission-critical business applications. The best-in-class Cisco 1800 Series architecture has been specifically designed to meet requirements of small to medium-sized businesses (SMBs), enterprise branch offices, and service provider-managed services applications for delivery of concurrent services at wire-speed performance. The integrated secure systems architecture of the Cisco 1800 Series delivers maximum business agility and investment protection.
The Cisco 1811 routers are focused on Ethernet access and are designed to be offered as customer premises equipment (CPE) in Metro Ethernet deployments. Because of their high-speed performance and dual Fast Ethernet WAN ports, they can support the high-bandwidth demands of Metro Ethernet and provide failover protection and load balancing if desired.
General
|
| Device Type |
Router - 8-port switch (integrated) |
| Enclosure Type |
Desktop - 1U |
| Connectivity Technology |
Wired |
| Data Link Protocol |
Ethernet, Fast Ethernet |
| Data Transfer Rate |
100 Mbps |
| Performance |
VPN throughput (3DES IPSec) : 40 Mbps
Firewall throughput : 100 Mbps |
| Capacity |
IPSec VPN tunnels : 50
Virtual interfaces (VLANs) : 8 |
| Network / Transport Protocol |
RSVP, IP/IPX, IPSec |
| Routing Protocol |
OSPF, RIP-1, RIP-2, BGP, EIGRP |
| Remote Management Protocol |
SNMP, HTTP, SSH-2 |
| Encryption Algorithm |
DES, Triple DES, 128-bit AES, 192-bit AES, 256-bit AES |
| Authentication Method |
Secure Shell v.2 (SSH2) |
| Features |
Firewall protection, hardware encryption, VPN support, load balancing, VLAN support, Stateful Packet Inspection (SPI), Intrusion Prevention System (IPS), URL filtering, Low-latency queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), Weighted Random Early Detection (WRED), wall mountable, Quality of Service (QoS), Committed Access Rate (CAR), Link Fragmentation and Interleaving (LFI) |
| Compliant Standards |
IEEE 802.1Q, IEEE 802.3af, IEEE 802.1x |
| RAM |
128 MB (installed) / 384 MB (max) - SDRAM |
| Flash Memory |
32 MB (installed) / 128 MB (max) |
| Status Indicators |
Port status, power |
|
Communications
|
| Type |
Modem (analogue) |
| Protocols & Specifications |
ITU V.92 |
| Max Transfer Rate |
56 Kbps |
|
Expansion / Connectivity
|
| Interfaces |
LAN : 8 x 10Base-T/100Base-TX - RJ-45
WAN : 2 x 10Base-T/100Base-TX - RJ-45
Management : 1 x auxiliary
Management : 1 x console
Phone line : 1 x RJ-11
Hi-Speed USB : 2 x |
| Expansion Slot(s) |
1 CompactFlash Card
1 memory |
|
Power
|
| Power Device |
Power supply - internal - 50 Watt |
| Voltage Required |
AC 120/230 V ( 50/60 Hz ) |
|
Miscellaneous
|
| Width |
32.4 cm |
| Depth |
24.6 cm |
| Height |
4.5 cm |
| Weight |
2.8 kg |
| Rack Mounting Kit |
Optional |
| Compliant Standards |
FCC Class A certified, CISPR 22 Class A, CISPR 24, EN 61000-3-2, VCCI Class A ITE, EN 61000-3-3, EN55024, EN55022 Class A, UL 60950, EN50082-1, CSA 22.2 No. 60950, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, FCC Part 68, AS/NZ 3548 Class A, JATE, ICES-003 Class A, CS-03, EN 61000-4-5, EN 61000-6-2, EN 61000-4-11, FCC CFR47 Part 15, EN300-386, EN 61000-4-8, IEC 60950-1, EN 60950-1, TBR3 |
|
Software / System Requirements
|
| OS Provided |
Cisco IOS Advanced IP services |
|
Environmental Parameters
|
| Min Operating Temperature |
0 °C |
| Max Operating Temperature |
40 °C |
| Humidity Range Operating |
10 - 85% |
|
| |
|
|
))
